About this deal
How to find a leak in my inflatable boat, RIB, dinghy, life raft or inflatable kayak collar or tubes
DR BOAT LIQUID Patch Glue Repair Kit Hot Tub Boat Kayak
Item: 125901754467 Dr Boat Heavy Duty Repair Kit for Boat Kayak, Canoe, Tent, Inflatables, Swimming. Mask around the repair area on the tube with removable masking tape to prevent unsightly adhesive ‘overspill’ when applying the adhesive. Allow a 2-3mm gap around the pencil/removable marker line to allow for some stretch in the patch when applied.Cut a fabric patch (two if the tear is greater than 50mm) with rounded corners, allowing a minimum 5cm overlap around the hole/tear. Place the patch over the hole and mark around the patch on the tube with a pencil/removable marker. If tear is greater than 50mm long then also cut one matching shaped piece of polythene.
Dr Boat Heavy Duty Repair Kit for Boat Kayak,Tent, Canoe
Successful repairs to RIB collars and inflatable boat tubes are dependent upon the environment in which the repair is carried out - ideal conditions are: relative humidity less than 60% (low cost humidity meters can be obtained from most good DIY stores if unsure) How to undertake a professional quality repair of your PVC or Hypalon RIB, inflatable boat and SIB tubes Safety firstHow to make an emergency repair using TEAR-AID® Type A to a Hypalon inflatable boat, RIB, raft and other Hypalon / rubber inflatable structures
Boat Repair Kit with PVC Patches Set Accessory for VGEBY 3Pcs Boat Repair Kit with PVC Patches Set Accessory for
How to fix or glue inflatable boat PVC fabric patches and accessories to Hypalon fabric RIB collars and tubes (and vice versa) Remove the masking tape and clean-off any excess adhesive with the MEK solvent. It is important to remove any excess adhesive as if this remains on the surface of your tubes it will turn an unsightly brown!Insert the rolled-up, polythene covered, repair patch into the tube through the tear or cut in the tube.
