Corsair ST100 RGB Premium Headphones/Headset Stand (Durable Aluminium Construction, Dynamic 9 Zone RGB Lighting, Built-In 3.5 mm Analog Input with Virtual 7.1 Surround, Dual USB, Black

Product Information

I cue.firmware.update.controller: "ST100RGB" FW update has been started. From "Primary FW: 0.02.91; Secondary FW: 0.02.91; Bootloader FW: 0.01" to "Secondary: Application: 0.4.106" I went into my PC and Deleted anything listed as Corsair, Anything listed as Void Pro and even went into my Device Manager and Deleted anything related to ST100 and Void Pro and then uninstalled the Software ICUE. Did a Search through my C Drive and Deleted anything remaining of Corsair relating to any .dll's or other files related to ST100 and Void Pro.

Corsair VOID ELITE RGB Wireless Gaming Headset - Black

I cue.hid_device_detector: Add close task: "\\\\?\\hid#vid_1b1c&pid_0a34#7&1d49b690&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}" However, the biggest problem for me came with gaming. If I start a gaming session (say on Destiny or Overwatch), after about 15 minutes the ST100 just cuts out and starts reconnecting/disconnecting every 15 secs. Seems to be power draw related, as these games are graphically intensive. But I can't be sure. I've tried multiple USB ports, multiple USB 3.0 to micro cables, and multiple computers. All produce the same result.Me too! I tried every USB port on my PC, and nothing works. Works fine for every other device in iCUE, except this. Just an update on this. As I got home from work and could sit down and trash the ICUE program completely. I'm still having trouble with power issues though. It seems to be failing with code 1167 in the logs. It'll shut down and then continuously try to start up again but never make a good connection.

Corsair on Reddit: St100 RGB Headphone Stand Infinite r/Corsair on Reddit: St100 RGB Headphone Stand Infinite

Disable USB Selective Suspend, located within the Advanced Power Options of the Windows Control Panel If so, the issue may be caused by the latest iCUE software update coming into conflict with your Windows build. You can try one of the following fixes below. Can all of you confirm which version of iCUE and Windows you are on? Just to confirm, the primary issue you all are having is that ST100 is not showing in iCUE after performing the firmware update?The ST100, for whatever reason, seems to work best with only partial USB initialization, for me that meant going into the BIOS and enabling Fast Boot. W cue.firmware.update.process.proto_n: "0" stderr: DD: tryOpen: Failed to open \\?\hid#vid_1b1c&pid_0a34#7&1d49b690&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}: 32